So if you are wanting the Encanto Inspired Candle I created you have 2 options, you can order one from my Etsy Page or you can make one yourself.
To Purchase
If you would like to give it a try and make it, I provided the instructions below.
You will need the following,
Candle ( I got mine from Amazon) https://www.amazon.com/gp/product/B079M1WNMN/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Circuit Machine w/ tools and grip mat
Transfer Tape https://www.amazon.com/gp/product/B00LJV1KYO/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Gold Adhesive Vinyl
Design
Ok, so once you have all your supplies and you have purchased your design, you will create your project with your Circuit app. With this design you will have to go ahead and manually remove the background, takes less then a min to do. From there you can print your project. I won't go into much detail on how to do this, I will assume you know how. Once you have printed your project you will then of course weed out all the parts you don't need. From there I suggest cutting the design into 3 parts. This is what I did, it will make it easier for you in the long run when putting the design together on the candle.
Once you have your parts you will then use your transfer tape to transfer the design to it, make sure you press hard when doing this, since there is a lot of small parts and spots. You don't want to miss anything. Once you have completed this, you can then place the transfer tape onto your candle. Then remove the transfer tape carefully to leave the design onto the candle. Then you are done :)
